Combo Khuyến Mãi PLC và Servo WECON

Ngày đăng: 04-07-2022
Lượt xem: 822

PLC LX5S 1412MT AN: Tính năng: - PLC tích hợp cổng ethernet - Điều khiển nội suy (G-code), - Điều khiển E-cam - Hỗ trợ đọc xung tốc độ cao

LX5S 1412M

Support to modify the frequency and position during pulse execution;
Supports the highest transmission taxa: 921600;
Support 100us high speed timer interrupt;
Supports up to 100 high-speed counter interrupts;
Support E-CAM;
Supports electronic gearing;
Support efficient and stable autotuning of PID and CCPID;
Supports LX 3V series modules;
USB power supply;
LX5V Software;
Execution speed from 0.03us ~ 0.08us.

Section	LX5S Series
Execution Mode	Round Scan / Interrupt / Event
Programming	Instruction List/Ladder Diagram
total instructions	Basic instructions: 29 / Application instructions: 170
Execution time	Basic instructions: 0.03-0.08us
system storage	512KB
Download/ Monitoring	Programming cable (serial) / Micro USB
High speed pulse output	Transistor type; 2 channels / 200KHz
High speed counter interrupt	100 channels
External input interrupt	X0-X5 supports rising and falling edges
timer interrupt	100 channels, supports 0.1ms interrupt
Single high speed input	2 channels 150KHz; 4 channels 10KHz
High speed input AB phase	1 channel 100K Hz, supports 2 or 4 frequency beats 2 channels 10K Hz, supports 2 or 4 frequency beats
holding addresses	software tuned
Storage	FLASH
Filter	For all input terminals
serial port	COM1 （RS422/RS485), COM2 （RS485 ）
Temperature	Working temperature: 0 ~ 55℃ / Storage temperature: 0 ~ 70℃
Humidity	35~ 85%RH (No condensation)
shock resistance	JIS C0040 standard
Immunity to influence	Complies with IEC61000-4-4 and GB/T 17626.4 standards: Noise voltage amplitude 1KVP-P, pulse width 10us, period 0.3s, edge time 5ns, duration 1min.
USB supply	Yes

Power supply

Section	AC	DC
Power supply	AC85~265V 50~60Hz	DC24V±10%
Power outage time	10ms	10ms
power fuse	250V 3.15A	250V 3.15A
peak current	<15A 5ms / AC 100V; <30A 5ms / AC 200V	<15A 1ms / DC 24V
Energy consumption	<60W	<30W
power output	DC24V 700mA	<30w (Does not include external power supply for modules)

Departure

Section		Relay	Transistor
output mode		--	NPN
input power		DC24V	DC24V
output circuit			DC5~30V
COM port current		--	<0.1mA (DC30V)
Isolation		Mechanic	optical coupling
Leakage current		--	0.1mA/DC30V
Min.Load		--	DC5V 2mA
Max. Burden	resistive	Point 2A, COM Port 8A	Point 0.5A COM Port 0.8A Point HSPO 0.3A
	inductive	80VA	12W/DC24V, HSPO Point 7.2W
	General	100W	0.9W/DC24V
Response time		<10ms	<0.2ms (Pulse output terminal: <5us)

VD1 Series Servo Driver

Ease of use:

Supports automatic load inertia measurement, motor rotation direction and movement stroke could be specified according to the mechanical structure;
Two notch filters are provided to suppress the mechanical vibration;
Supports VDI(virtual digital input), reducing physical wiring;
Supports automatic rigidity measurement and parameter adjustment;
Supports Modbus communication. User could set, view parameters and monitor drive status through communication;
Real-time measurement of load vibration frequency and amplitude;
Supports batch import and export function to set parameters;
View position, speed, torque and other curves on PC in real time.

Protective function :

Settable maximum speed limit, maximum torque limit;
Position pulse filter function, user could set pulse frequency and anti-interference level;
Over-voltage, under-voltage, over-current, over-speed, overload, over-temperature protection; excessive position deviation fault detection;
Encoder disconnection detection, encoder failure detection; power supply disconnection detection;